EVX EMS Remote Monitoring Setup

Documentation/

EVX EMS Remote Monitoring Setup

This guide covers the EMS gateway, communication parameters and remote platform connection.

EVX EMS and communication test
Confirm gateway, network and points list before connection

Before you start

  • Confirm site network, static IP or 4G router.
  • Prepare serial number, points list and platform account.
  • Confirm Modbus TCP/RTU parameters and meter address.

Connection steps

  1. Connect the EMS gateway to the switch or 4G router.
  2. Configure platform address, port and serial number.
  3. Verify telemetry, status and alarm points.
  4. Confirm online status and history in the platform.

Troubleshooting

SymptomCheck
Gateway offlinePower, network and platform address
Data not updatingPoints list, slave address and polling interval
Alarms missingAlarm mapping and platform permissions